Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of Thermometer
This unit can be wall mounted or placed on a flat even surface. Fold out
holder / stand as needed.
To observe outdoor temperatures, the wired temperature probe must be
placed outside in shaded, protected area.
Operation of Thermometer
To change display between Celsius and Fahrenheit, insert
long narrow pin (not included) at the C/F hole on the back of
the unit.
Temperature range is -30
Cable length of temperature probe: 315 cm
Notes:
The unit and the probe should be placed in an area with
away from direct sunlight; away from heating and cooling
vents, and any heating and cooling elements; away from
fans and other ventilation; away from any other heat / cooling
source.
The probe is designed to measure air temperature only and
not to measure any liquids or solids.
Keep moisture and water away from the unit at all times.
Display unit should be placed indoor only, while temperature
probe can be used outdoors.
0
0
C to 50
C (-54
EN3
0
0
F to 90
F)
Publicidad
