Publicidad
Idiomas disponibles
Idiomas disponibles
2. Water Connections
Figure N º 2 shows a diagram that will help install water also meets the description of the parties.
It is recommended to follow these instructions before connecting the water:
Use appropriate components and glues that support the hot water.
In the cold water inlet must be installed at least 1 meter CPVC pipe or other material resistant
to hot water.
Never install a check valve near the heater.
Steps for installation of water:
Install 2 valves (metal) to the inlet and outlet water
Connect the cold water inlet to the supply hose indicated.
Connect the hot water outlet to the supply hose indicated.
Make sure the pressure relief valve is put into drainage.
Before making the electrical connection and has done the installation as indicated above, run the
water for a few minutes to remove the air chambers.
All manuals and user guides at all-guides.com
Figure Nº 2 Connections to the Water System
5
Publicidad
Capítulos
