Alecto BL-165 Modo De Empleo página 18

All manuals and user guides at all-guides.com
3. Connect the BL-165 with a 230V AC wall
socket.
4. The red LED lights, indicating the batteries are
charged.
5. After the predetermined time, the charger will
switch to the trickle charge mode and the green
LED will light up. In this condition the batteries
can remain in the charger indefinitely.
Test:
The testmode operates with the types AAA, AA, C
and D only. Place the battery into the left slot and
set the modeswitch into position TEST. The test
LED will light. If the LED dims then is it advisable
to discharge the batteries and to charge them
again.
Discharging:
Install the batteries (AAA, AA, C and D only) and
set the modeswitch into position DISCHARGE
position. The batteries will now be discharged. No
Led will light in this condition.
Attention: after discharging, the BL-165 does not
automatically switch into charge mode. You have
to check whether the batteries are fully discharged
(TEST-mode) and activate the charge-mode manu-
ally (set modeswitch into position CHARGE).
15