ASROCK Z690 AQUA Manual Del Usuario página 40

Serial ATA3 Connectors
Right Angle:
(SATA3_0:
see p.1, No. 16)(Upper)
(SATA3_1:
see p.1, No. 16)(Lower)
(SATA3_2
see p.1, No. 17)(Upper)
(SATA3_3:
see p.1, No. 17)(Lower)
(SATA3_A1:
see p.1, No. 18)(Upper)
(SATA3_A2:
see p.1, No. 18)(Upper)
(SATA3_A3:
see p.1, No. 19)(Upper)
(SATA3_A4:
see p.1, No. 19)(Upper)
USB 2.0 Headers
(9-pin USB_1_2)
(see p.1, No. 29)
(9-pin USB_3_4)
(see p.1, No. 28)
USB 3.2 Gen1 Headers
Right Angle:
(19-pin USB3_5_6)
(see p.1, No. 15)
Vertical:
(19-pin USB3_7_8)
(see p.1, No. 14)
36
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+ IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX-
Vbus V
V Vbus
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PB_SSRX+
IntA_PA_SSRX-
IntA_PA_SSRX+ GND
IntA_PB_SSTX-
GND
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
*To minimize the boot
time, use Intel® Z690
SATA ports (SATA3_0~3)
for your bootable devices.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There are two headers on
this motherboard. Each
USB 3.2 Gen1 header can
support two ports.