Regulatrory Marking; Technical Characteristics; Ce Conformity Statement - stayer LS1200 Manual De Instrucciones

6. Regulatory Marking

6.1 Technical Characteristics

= Power
= Freewheeling speed
= Maximum diameter for tool
= Tool width
= Disc axis
= Protection class
= Weight
= Acoustic power level
= Acoustic pressure level
= Vibration
These data are valid for nominal voltages of [U] 230/240
V ~ 50/60 Hz - 110/120 V ~ 60 Hz. Values may vary if
the voltage were lower, and in specific executions for
some countries. Pay attention to the article no. on the
characteristics plate of your apparatus as the commercial
names of some sets of apparatus may differ.
The noise and vibration levels were determined according
to En60745.
The typical A sound pressure level evaluated for the
equipment is:
- Acoustic pressure level:
LS1200 84 dB(A), LSR1200 82 dB(A), LS1200B 84 dB(A)
- Acoustic power level:
LS1200 97 dB(A), LSR1200 95 dB(A), LS1200B 97 dB(A)
- Uncertainty: K= 3 dB
Total oscillation value (during metal surface burnishing:
- Emission value:
- Uncertainty:
The values indicated are valid for new
equipment. Noise and vibration values are
modified with daily use.
The oscillation level indicated in these instructions was
measured according to a measurement procedure in
compliance with EN60745 and may be used to compare
electrical tools with each other. It is also suitable to make a
provisional oscillation estimate. The oscillation level
indicated is representative for the main applications of the
electrical tool. However, the oscillation levels may differ if
the electrical tool is used with different application tools or
with deficient maintenance. This could significantly
increase the oscillation load during the entire period. The
time during which the equipment is at a halt or, otherwise,
the time during which it has not really worked while being
in operation, will also be taken into account to determine
a = 3,5 m/s
2
h
K=1.5 m/s
2
ENGLISH
16
the vibration loads. This may significantly reduce the
oscillation load during the entire working period.
Implement additional safety measures for operator
protection before determining the oscillations, for example:
the maintenance of electrical and application tools,
keeping hands warm, work sequence organization.
Use ear protection (headphones), sound
pressure level above 85dB(A).
6.2 Conformity Statement
Manufacturer: STAYER IBERICA, S.A.
Address:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: 902 91 86 81 / Fax: +34 91 691 86 31
Type of machine: Polisher
Models:
We declare under our own responsibility that the
machine listed above are in conformity with the following
harmonized standards:
EN 60745-1, EN 60745-2-4, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3 with the provisions of the
following directives 2006/42/CE, 2014/30/EU, 2011/65/EU
Person authorised to compile the technical file,
established in the Community:
STAYER IBERICA, S.A.
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Ramiro de la fuente
Director Manager
January, 2019
16
LS 1200 / LS 1200B / LSR 1200