Technical Data; Before Starting The Equipment - EINHELL GE-SA 1335 P Manual De Instrucciones

ned. We recommend you to scarify your lawn in
the spring (April) and autumn (October).
The aerating roller scratches the surface of the
lawn, helping water to drain off more easily as
well as promoting oxygen intake.
Aerate your lawn throughout the growing period.
Warning! Due to the high risk of bodily injury to
the user, the equipment may not be used to grind
up branch or hedge clippings. Moreover, the
equipment may not be used as a power cultivator
to level out high areas such as mole hills.
For safety reasons, the equipment may not be
used as a drive unit for other work tools or tool
sets of any kind.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Engine type: .......................... 1 cylinder, 4-stroke
Displacement ........................................53.2 ccm
Max. engine output .......................1.3 kW / 1.8 hp
Working speed .................................... 6,800 rpm
Fuel: ........................................... Unleaded petrol
Tank capacity: ..................................... approx. 1 l
Engine oil: ...................................... approx. 0.25 l
Spark plug: ..................................... Torch A5RTC
Blades (number) ............................................. 20
Blade diameter ....................................... 126 mm
Depth setting ...................................... -3 - +9 mm
Working width: ........................................ 350 mm
L sound pressure level 85.4 dB(A), K = 3 dB (A)
pA
L sound power level ......................... 103 dB(A)
WA
Vibration ahw ...................6.32 m/s
Weight: .....................................................17.9 kg
Anl_GE_SA_1335_P_SPK7.indb 22 Anl_GE_SA_1335_P_SPK7.indb 22
GB

5. Before starting the equipment

The scarifi er is delivered unassembled. The
catch basket, the complete push bar and the rear
wheels must mounted before using the scarifi er.
Follow the operating instructions step-by-step
and use the pictures provided as a visual guide to
easily assemble the equipment.
Fitting the push bar brackets (see Figures 4a
and 4b)
•
Remove the quick-lock lever (Fig. 4a/Item 11)
and the washer (Fig. 4a/Item 13).
•
Screw the push bar bracket (Fig. 4a/Item 10)
onto the fastening screw. Make sure that the
curve in the tube (Fig. 4b/Item A) is on the
outside.
•
Now put the washer back on and tighten with
the quick-release lever.
The same tilt angle must be set for both push bar
brackets!
Fitting the lower push bar (see Fig. 4c)
•
The lower push bar (Fig. 4c/Item 9) must be
pushed onto the push bar brackets.
•
Now join the tubes together using the screws
(Item 12), washers (Item 13) and quick-lock
levers (Item 11) supplied.
Fitting the upper push bar (see Fig. 4d to Fig.
4f)
•
Position the upper push bar (Fig. 4d/Item 8)
such that its holes line up with the holes of the
lower bar.
•
Now join the tubes together using the screws
(Item 12), washers (Item 13) and quick-lock
levers (Item 11) supplied.
•
Use the cable clips (Item 14) to attach the
power cable to the tubes of the push bars so
that it is possible to open and shut the ejector
flap.
Please ensure that the ejector fl ap can be opened
and closed easily!
, K = 1.5 m/s
2 2
- 22 -
16.09.2016 09:36:21 16.09.2016 09:36:21