Resetting The Module - THOMSON GUARDIAN Manual De Instrucciones

WI-FI RECEIVER MODULE
C - INSTALLATION
From this step, you can add this device to the
Google Home and Alexa voice assistants.
If you want to give access to your family, they must
download the Thomson At Home app and connect to
the account on which the module is saved.
If your Wi-Fi range is not sufficient to reach your
gate, we recommend placing the module inside
your home (within radio range) and using 2
connecting wires from the module to your gate
opening mechanism (0.75 mm over 50 m max.).

5 - RESETTING THE MODULE

The following instructions may help you if you have
any problems during the pairing procedure:
A long press (more than 15s) on the button located
on the back of the module enables you to reset
the module. The module will start to flash rapidly
to confirm the operation. The module must also be
deleted from the application.
10
EN
The reset process can take 2 to 3 minutes
The LED located on the control module gives the
following indications:
- Fast flashing: The module is in pairing mode with
the smartphone
- Slow flashing: The module is connecting to the
server
- LED off: The module is connected. It can be
controlled or it is switched off!