Setting The Clock - Teac SR-LUXi Manual Del Usuario

Setting the Clock

Press and hold the CLOCK ADJ button on the
1
back for more than 3 seconds.
Release it when "12 H" or "24 H" blinks on the display .
< When the power is first turned on, the display
brightness is at the lowest setting . To make it
brighter, press the DIMMER button .
< If you do not press a button for 8 seconds, the clock
setting will end automatically .
If you want to change the hour mode, press a
VOLUME button (+ or −) .
< When set to 12-hour mode, appears following PM
times . Nothing appears with AM times .
Press the CLOCK ADJ button again.
2
The "hour" value blinks .
Press a VOLUME button (+ or −) repeatedly to
3
set the current hour, and then press the CLOCK
ADJ button.
Press a VOLUME button (+ or −) repeatedly to
4
set the current minute, and then press the
CLOCK ADJ button.
Setting the clock is now completed and the clock
starts from the 00 seconds .
Setting daylight saving time
To change the clock for daylight
saving time, set the DST switch to
ON .
Hold down
more than 3 sec.
11