Setting The Wake Up Timer - Teac SR-LUXi Manual Del Usuario

Wake Up Timer (1)
The unit can be programmed to turn on at a specified
time . It can also be set to brighten the light gradually
before the set time . You can set the unit to play an iPod/
iPhone, FM radio or a buzzer sound .
If the sound source is set to iPod or FM
When the set time is reached, the power of audio
section is turned on . 60 minutes later, the power turns
to standby (off) again .
If the sound source is set to buzzer
When the set time is reached, the buzzer sounds for
5 minutes and then the unit turns to standby (off)
again .

Setting the Wake Up Timer

Press and hold the ALARM button for more than
1
3 seconds.
The clock on the display and the ALARM button blink .
< If you do not press the button for 8 seconds, the
wake up timer setting mode ends automatically .
Use the VOLUME buttons (+ and −) to set the
2
hour and minute.
< Pressing a VOLUME button (+ or −) once causes
the time to change by 5 minutes . Press and hold a
button to make it change more quickly .
Press the ALARM button.
3
The name of the selected source appears on the
display .
22
< Adjust the clock before setting the
timer (page 11) .
< The wake up timer can be set in
5-minute increments .
< T h e l i g h t c a n b e s e t to s t a r t
becoming brighter either 10 or 30
minutes before the set time . The
light can also be set to stay off .
Hold down
more than 3 sec.