High Power Mode; Setting The Timer; Setting The 1 Hour Timer - Technibel PORTABLE SCDf32C5I Instrucciones De Uso

HIGH POWER mODE

You can select High Power only during cooling mode and
not during dehumidifying (dry) and fan mode. High Power
mode allows to obtain the maximum air conditioner's
efficiency. The user can choose to activate the High
Power mode, using the remote control unit, after having
selected cooling mode. Under these conditions the air
conditioner will reach its maximum thermal power and
consequently also the maximum electrical consumption
and noise. On the contrary, if you want to obtain the best
performance in efficiency and silentness, High Power
mode is not recommended: let the air conditioner run in
normal condition (factory default program).
To activate High Power mode it is necessary (after having
selected the cooling mode) to press the HIGH POWER
button : the symbol
the operation lamp (green lamp on the front panel of the
air conditioner) begins blinking slowly, indicating that High
Power mode is activated; press the button again to release
the function: therefore the green lamp will stop blinking
and it will be switched on permanently.
NOTES
• During the high power operation the room temperature
could not correspond to the set temperature.
• HIGH POWER program remains set also if you switch
OFF and ON again the air conditioner.
switches on; at this point

SETTING THE TImER

A) HOW TO SET THE ON TImE
1. Press the ST button once.
The ON and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display
will change automatically back to
show the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the
button to activate the
ON timer.
B) HOW TO SET THE Off TImE
1. Press the ST button twice.
The OFF and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display will
change automatically back to show
the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the button two times to
activate the OFF timer.
C) HOW TO SET A PROGRAm fOR
DAILY ON/Off OPERATION (OR
vICEvERSA)
1. Set the timer ON/OFF as shown in A)
and B).
2. Press the ON/OFF button to start the
air conditioner.
3. Press three times the
activate the DAILY timer.
NOTE
After timer setting, press ST button in order to check the
ON/OFF setting time.

SETTING THE 1 HOUR TImER

This function causes the unit to operate for one hour at the
set conditions, regardless of whether the unit is on or off.
TIMER SETTING PROCEDURE.
• Press four times the
HOUR TIMER mark will appear on the
display.
CANCELLATION PROCEDURE
• Press the ON/OFF button to turn the air conditioner off.
• Wait for the indoor unit to stop operating.
• Press the ON/OFF button again to turn the air conditioner
on.
9
C
3
2 2
1 4
button to
button.The 1
EN