Hoshizaki HRE-70B Manual De Instalación página 3

Ocultar thumbs Ver también para HRE-70B:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
ENGLISH
Shakeproof Leg
Shakeproof
Fitting
Side View
Bottom View
Fig. 2
3. SET UP
IMPORTANT
1. Do not tilt the unit more than 45° when
mounting the Legs or Casters.
2. Carry the unit by holding its bottom.
1) Cut the vinyl shipping tape and remove the carton.
2) Take out the accessory Shelves and Rails (R) and
(L). Attach the Rails horizontally to the right and
left Shelf Posts. Place the Shelf on the Rails.
See Fig. 3.
3) Before operating the unit, remove all shipping
carton, packing, tape(s) and protective plastic film
on the exterior. Be careful not to damage the
exterior panels.
4) Position the unit in a selected site.
5) Clean the interior with a soft cloth soaked in cold
or warm water containing the proper amount of
neutral cleaner and wrung dry.
6) Level the refrigerator/freezer in both the left-to-right
and the front-to-rear directions. To adjust the height
of the unit, insert the Spacers (accessory) into
the Caster joints. Use the Spanner (accessory)
to loosen or tighten the Casters. After making the
unit level, tighten the Casters securely. Lock the
stoppers of the front Casters. See Fig. 4.
All manuals and user guides at all-guides.com
2
(1) Hook
(2) Hook
(1)
(2)
Fig. 3
Spacer
Spanner
Fig. 4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hre-140bHfe-70bHfe-140b

Tabla de contenido