Tempo Communications 508S Manual Del Usuario página 3

This symbol is used to call your attention to hazards or unsafe practices which could
result in an injury or property damage. The signal word, defined below, indicates the
severity of the hazard. The message after the signal word provides information for
preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result in severe injury or death.
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards which, if not avoided, MAY result in injury.
Do not expose this unit to rain or moisture. Contact with live circuits can result in
severe injury or death.
Use this unit for the manufacturer's intended purpose only, as described in this
manual. Any other use can impair the protection provided by the unit.
Use test leads or accessories that are appropriate for the application. See the
category and voltage rating of the test lead or accessory.
Inspect the test leads or accessory before use. The item(s) must be clean and dry,
and the insulation must be in good condition.
Before opening the case, remove the test leads from the circuit and shut off the
unit.
Failure to observe these warnings may result in severe injury or death
Do not attempt to repair this unit. It contains no user-serviceable parts.
Do not expose the unit to extreme temperatures or high humidity. See
Specifications.
Failure to observe these precautions can result in injury and can
damage the instrument.
SAFETY
ALERT
SYMBOL
ELECTRIC
SHOCK HAZARD
3