Publicidad
Step 16
1
D133
Groove
å
Insert the DRAWER SIDES (D133 and D139) at an angle
into the slot at each end of the DRAWER FRONT (K).
3
Minimum
190 degrees
M63
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M63) to the DRAWER
FRONT (K). Tighten one HIDDEN CAM.
Page 20
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
K
D139
Maximum
Arrow
210 degrees
K
VIEW THE T-LOCK BOX VIDEO
2
U n fi
n i s h
s u r
e d
f a c
e
D133
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D948) into the
grooves in the DRAWER SIDES (D133 and D139) and
DRAWER FRONT (K).
4
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D133
D142
M63
å
Fasten the DRAWER BACK (D142) to the DRAWER
SIDES (D133 and D139) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D948
K
D139
30S
(5 used in this step)
Be sure the
D139
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Publicidad
