NUTRIBULLET SELECT Manual De Instrucciones página 9

damage the power
cord. Do not allow
the cord to touch hot
surfaces, including
the stove.
• If the motor stops
working, unplug the
motor base and let
it cool for at least
15 minutes before
attempting to use it
again. Your nutribullet
Select has an internal
thermal breaker that
shuts off the motor when
it overheats. The thermal
breaker will reset when
the unit is unplugged,
and the thermal breaker
cools down sufficiently.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a
circuit that is regularly
switched on and off
by the utility.
STOVE-TOP
HEATING SAFET Y
Do not blend hot
ingredients in any sealed
nutribullet
To heat items that have
been blended at room
®
temperature or cooler
(21°C/70°F or less),
transfer mixture to a
stovetop pot to heat. Use
a thermometer to test
the internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be
hot inside.
The nutribullet
is not intended for use
on the stove top. Do
not place the motor
base or any nutribullet
accessory on the
stove or microwave
or immerse in boiling
water. This may result
in damage to the
accessory.
cup!
®
Select
®
®
9