Costway BB5558 Manual Del Usuario página 4

STEP4: Diaper changer assembly
a.Unfold the diaper changer.
b.Insert the two tubes inside the diaper changer as shown.
c.Attach the 4 clips on the top short hand rails. Make sure all 4 clips are securely attached to the top
short rails.
When you put you baby on the diaper changer, Always use the harness to keep your baby in safe.
Storage assembly
Attach the clips of the storage to the top rail.
Turning toy bar with music box assembly
Hanging the music box on the bracket hook, then put the bracket onto the short handrail
06
4. FOLDING AND STORING THE PRODUCT
STEP 1: FOLDING THE PLAYPEN
a.Remove the mattress from the playpen (Fig. 10) and lift up the bottom with the help of the fabric
pulling strap (Fig.10-1).
Fig.10
b. Lift up rims A simultaneously while pressing the unlocking button underneath the rim( Fig.11).
c. Lift up rims B simultaneously while pressing the unlocking button underneath the rim( Fig.12).
Each rim should buckle on both sides, as shown here(Fig. 13 and Fig.14).
Fig.11
Fig.13
www.costway.com
Fig.10-1
Fig.12
Fig.14
07