Troubleshooting For Remote Wi-Fi Module - Extraflame ETIQUETA NEGRA Manual Del Usuario

TROUBLESHOOTING FOR REMOTE WI-FI MODULE

3.
Configuration reset button
4.
Green LED - Power
5.
Blue LED - Access point
6.
Orange LED - Station
7. Orange LED - Cloud
LED STATUS
Off
Power LED
Flashing
(green)
On
Off
Access point LED
(blue)
On
Off
Station LED
(orange) Flashing
On
Off
Flashing
Cloud LED
Flashing with
(orange)
2 pulses per
second
Flashing with
3 pulses per
second
On
OTHER
• The 4 LEDs turn on and off in sequence > The firmware is being updated.
The 4 LEDs flash 3 times simultaneously > The reset has been performed correctly using the relative button.
•
DESCRIPTION
The module is not powered.
The module is starting.
The module has started
successfully.
The module is correctly
connected to a Wi-Fi network
The Wi-Fi module is ready to
be configured to a home Wi-Fi
network
The module is not connected to
the home Wi-Fi network
The module is connecting to
the home Wi-Fi network
The module is connected to the
home Wi-Fi network
The module is not connected to
the cloud
The module is connecting to
the cloud
The module is connected
to the cloud but is not
communicating correctly
The module is connected
to the cloud but is not
communicating correctly
The module is connected to the
cloud
ENGLISH
POSSIBLE PROBLEM
ASSOCIATED
The module is not working.
-
-
-
-
No configuration was made via
App
If this situation persists for
several minutes, there is a
problem connecting to the
home Wi-Fi network
-
-
If this situation persists for
several minutes, it means that
the module cannot connect to
the Extraflame server.
AN incorrect or unsupported
stove article code has been
entered.
Cloud configuration problem
-
7 6 5 4 3
SOLUTION
Connect the supplied external
power supply.
-
-
-
-
Download the Total Control
2.0 App and perform the
configuration procedure
Make sure that the home
network is present and that its
signal is strong enough.
Should it be necessary to
reconfigure the product, perform
the reset procedure
-
-
Check that the home Wi-Fi
network has access to the
Internet.
Perform the reset procedure and
reconfigure the module, taking
care to use the correct codes.
Perform the reset procedure and
reconfigure the module, taking
care to use the correct codes.
Make sure that the stove is
compatible with the module
at https://www.lanordica-
extraflame.com/it/accessori/
modulo-Wi-Fi-etichetta-nera
Contact after-sales centre
-
11