USING THE HOOD (see illustrations 16 - 20)
• The hood has three positions.
• To fold it down, simultaneously press the buttons situated on both
sides of the frame inside the hood, until it is in the required position
(fig.16-19).
• To return to the previous position, just gently pull the handle of the
hood in the correct direction (fig. 20).
UNISYSTEM (see illustrations 21-23)
NOTE: Remove and store the safety fasteners before installing the
Mako on a pushchair
This exclusive fastener system means that the Mako can be used
with the following strollers: Downtown, S4, S4 Reverse, Vintage,
Vintage 2, Vintage 3, Jazz and Citta.
The fitting procedure on all of them is the following:
• Put the brake on.
• Place the Mako on the pushchair, facing backwards.
• Position the fasteners in their slots (fig.21).
• Press downwards until they "click", indicating that they are securely
fastened (fig.22), and a green mark appears on each one of the
two windows of the fasteners.
• To remove, simply press and then release the red button on both
fasteners (window with the red mark) and pull upwards to remove it
from the frame of the chair (fig.23).
Washing instructions
• The upholstery should be hand washed, using warm water and a
mild soap. Lacquered and plastic parts should be cleaned with a
polisher free of abrasives or solvents.
16