Control Elements - Waeco MagicWatch MWE800 Instrucciones De Montaje Y De Uso

_MWE-800-4F.book Seite 36 Freitag, 21. Juli 2006 4:28 16
Technical description
Caution!
As these four examples show, situations can arise where the
device fails to display an object or does not display the shortest
distance.
The device does not relieve you of your obligation to take special
care when parking. Therefore, always be extremely careful when
you park your vehicle.
If an object enters the blind spot of the sensors, MagicWatch auto-
matically shows the distance to the next object. This means the
piezo speaker changes from fast to medium beeps and the display
shows a different distance.
In this case, always stop the vehicle immediately and investigate
the situation.
5.3

Control elements

The control box has the following control elements:
No. in
fig. 10, page 6
1
2
3
4
5
36
All manuals and user guides at all-guides.com
Meaning
Connection for the connecting cable to the display.
Connection for the for sensor cables.
Observe the designation on the sensor cable and on
the main unit.
Control for adjusting the sensor sensitivity.
Turn the control clockwise to increase the sensitivity.
Control for adjusting the operating time if the device is
automatically activated by the reverse gear
You can set the operating time from 5 to 15 seconds.
Supply line connection.
MagicWatch MWE800