Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Volleyball Game
Step 1
• Fill both bases with water or sand
(preferred) and cover openings with caps.
Step 2
• Insert the PVC Support into the
Base AT AN ANGLE. (Diagram A)
While pushing Support into the
Base, keep it pulled back a bit to
make sure that Support CLEARS
the metal washer that is built
into the Base at the opening
(Diagram B). Use a Rubber Mallet
if necessary.
• Once the Support is inserted
into the Base, secure through the
2nd hole from the bottom with one
3" Bolt (Diagram C).
Step 3
• Insert Pole with two holes on
bottom into Base Connector (Tap
with rubber mallet if needed).
Secure with one 2" bolt in upper
hole of the Base Connector and
secure with ¼-20 Hex Nut. Repeat
for second Base.
Step 4
• Place End Caps on top of Poles
Step 5
• Secure eyelets with 10-24 Hex Nuts as
shown. Insert Corner Ties of Net
through Eyelets and secure to each
pole.
• The Net can be shortened by rolling
on Poles or lengthened by extending
the Corner Ties. (for extra stability
secure rope ends beyond Bases with
tent stakes [not included])
DIAGRAM A
Corner Ties
to eyelets
Base
Connector
Game Base
DIAGRAM C
DIAGRAM B
Washer
2" Bolt
"
3
Bolt
poolmaster.com
3
Publicidad
Tabla de contenido
