Corsair Gaming Serie Manual página 9

All manuals and user guides at all-guides.com
3. Connect the main 24-pin power cable. The main 24-pin power cable has a
detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin
socket on the motherboard.
a. If your motherboard has a 24-pin socket, you may connect the 24-pin
main power cable from the power supply directly to your motherboard.
b. If your motherboard has a 20-pin socket, you must detach the 4-pin
cable from the 24-pin connector, and then plug the 20-pin cable onto
your motherboard without connecting the 4-pin connector.
4. Connect the 8-pin +12V (EPS12V) cable.
a. If your motherboard has an 8-pin +12V socket, connect the 8-pin
cable directly to your motherboard.
b. If your motherboard has a 4-pin socket, detach the 4-pin from
the 8-pin cable, and then plug this 4-pin cable directly to
your motherboard.
WARNING: The detachable 4-pin from the 24-pin main connector is not a "P4" or
"+12V" connector. Serious damage can be caused if you use it in place of a "P4" or
"+12V" connector.
5. Connect the peripheral cables, PCI-Express cables, and SATA cables.
a. Connect the peripheral cables to your hard drive and CD-ROM/DVD-ROM
power sockets.
b. Connect the SATA cables to your SATA SSD or hard drive's power sockets.
c. Connect the PCI-Express cables to the power sockets of your PCI-Express
video cards if required.
d. Connect the peripheral cables to any peripherals requiring a small
4-pin connector.
e. Make sure all the cables are tightly connected.
6. Connect the AC power cord to the power supply and turn it on by pushing the
switch to the ON position (marked with "I").
Congratulations! You have completed installation of your new Corsair Gaming Series
power supply and your system is ready to go!
Fan LED Control
LED output is controlled with a button near the power switch. On the GS500 and GS600,
tap the button to turn the blue LEDs on or off. On the GS700 and GS800, tap the button
to cycle between red, white, blue, and off.
G A M I N G S E R I E S
™
9