Transport; Storage - Garland Roll&Comb 302 W-V20 Manual De Instrucciones

9. TRANSPORT

Before transporting this machine, always disconnect
the machine.
Never lift or transport the machine while the engine is
running. Also turn off the engine whenever it moves
between different work areas.
You can transport the machine by pushing it while it is
rolling. Be careful not to cross areas where there are
stones, sticks or other objects that may be hit by the
bottom of the machine and / or the roller.
If you have to raise the machine check the technical
characteristics of the weight of the machine before
raising it to ensure that it is a weight that you can
support.
If you are going to transport the device in vehicles,
secure it firmly to prevent it from sliding or tipping
over.
Always transport the machine horizontally.

10. STORAGE

Disconnect the machine from the mains before storing
Unplug the battery from the machine before storing it
and, to prevent damage to the battery, always charge
it fully. If you are not going to use the machine for a
long period of time, recharge the battery every 30
days. Never store the discharged battery.
Store batteries away from metal materials such
as paper clips, coins, keys, nails, screws or other
small metallic materials that can accidentally make
connection between the terminals and produce a
short circuit. Short-circuiting the battery can cause the
battery to explode or burn.
All manuals and user guides at all-guides.com
The battery will discharge more slowly at low
temperatures.
The machine must be stored clean, on a flat surface.
Store the machine in a place where the temperature
range is not below 0ºC or above 45ºC.
11. DISPOSAL AND RECYCLING OF
MACHINE
The battery of this machine contains elements
dangerous to health and the environment and must be
recycled appropriately. Do not throw the battery in the
trash, take it to an official waste collection point.
Get rid of your device so
ecological We should not get rid of
the machines together with domestic
garbage.
Its plastic and metal components can be classified
according to their nature and recycled.
The materials used to pack this machine are
recyclable. Please, do not throw the packaging to the
domestic trash. Tire these packaging at an official
waste collection point.
31/84
English