Measuring Human Temperature - HoMedics NT17 Manual Del Usuario

MEASURING HUMAN
TEMPERATURE
1. Press the Power button to turn the
thermometer on. The unit will run a self-test
and all symbols on the display will
momentarily appear.
2. Ensure that the thermometer is in Human
mode; the Human symbol will be on the
display. To alternate between modes press
and release the Human/Object Mode
button until you see the desired measure-
ment symbol on the display.
3. Press and hold the "Scan &
measure button", aiming the
Measurement Sensor
at the person's forehead,
holding the thermometer
approximately 0.5~3 cm.
But don't touch the
forehead.
4. Release the "Scan & measure button".
In about a second, you will hear a short
beep means this temperature reading has
been completed and accompany with a
back-light.
5. If the temperature measurement is below
38°C (100.4°F), a "Smiling Face
appear next to the reading. If the reading is
38°C (100.4°F) or above, a "Frowning Face
" will be displayed and the RED LED
light up.
Fever Alarm: Only in Human Mode
and Human/Night Mode
Refer to
instruction
6. After about 30 seconds after use, the thermometer will
automatically beep and shut off.
" will
12
0.5~3 cm
0.5~3 cm
0.5~3 cm
0.5~3 cm
°F
°F
°F
°F
°F
°F
°F
°F