Remote Control - König Electronic SEC-UNIT30 Manual Del Usuario

All manuals and user guides at all-guides.com
Monitor Rear View:

Remote Control:

MENU: Press to access the main menu.
QUAD: Press to switch to quad view.
AUTO: Press to start sequential view of all channels (CH1, 2, 3, 4 and quad view)
if activated in the AUTO SEQUENCE menu.
PLAY: Press to switch to playback video recordings.
ESC: Exit menu.
UP: Navigate UP in menus or other functions.
P/N: Press to toggle between PAL/NTSC (PAL for Europe).
ZOOM: Select a channel and press to enlarge the image. Set a frame with the UP, DOWN, + and -
buttons. Now press the QUAD button to enlarge the image. Navigate with the UP, DOWN, +
and - buttons in the enlarged image.
Press the QUAD button to return to select another zoom area.
Press the ZOOM button again to return to quad view.
–: Press to change values in the menus.
+: Press to change values in the menus.
PIP: Press the PIP (picture in picture) button to access the PIP setup mode. By default, the main
window is set to channel 1 and the PIP window to channel 2. While the main window is flashing,
press the UP or - buttons to select the video channel for the main window. Then press the QUAD
button to select the video channel for the sub window (Note: Press the QUAD button to confirm if
the desired channel is already displayed in the main window; the channel number stops flashing).
Press the UP or – buttons to select the channel for the sub window and press the QUAD button
to confirm. The channel number stops flashing. Press the QUAD button to exit the PIP function.
DOWN: Navigate DOWN in menus or other functions.
FREEZE: Press to freeze the image (not in QUAD mode). Press again to unfreeze the image.
CH1, CH2, CH3, CH4: Press to select the individual channel.
1. RATING LABEL: Information about this model
2. CAMERA INPUT: Input for channels 1, 2, 3 and 4
3. ALARM OUTPUT: Connect supplied cable to alarm siren
4. DC INPUT: 12 V power input (use only supplied AC/DC
adapter)
Power Supply
48 V/1 A
Alarm bell
3