Sirius Satellite Radio S900 Instrucciones De Uso página 16

MAINTENANCE
* An accurate maintenance guarantees good
functioning and long-lasting performance.
* Particular care is due to the grease filter pa-
nel. It can be removed by pushing its special
handle toward the back-side of the cooker
hood and turning the filter downwards so to
unfasten it from its slot (Fig.3B).
To insert the filter just perform the opposite
operation.
After 30 hours working (model SL900), the
push button control panel will signal the sa-
turation of the grease filter by lighting all the
buttons. Press the timer button to reset
The grease filter needs cleaning by regular
hand-washing or in dishwashers every two
months at least or depending on its use.
* In case the appliance is used in its filtering
version, the active coal filter (Fig.7A) needs
to be periodically replaced. The coal filter
can be removed by removing the grease filter
first (Fig.3B), and by pulling its special pla-
stic tongue until it is unfastened from its slot.
Re-insert the coal filter by operating in the
opposite way. The coal filter needs replacing
depending on the use, but however every six
months at least.
* To clean the appliance itself tepid water and
neutral detergent are recommended, whi-
le abrasive products should be avoided. For
steel appliances specialized detergents are
recommended (please follow the instructions
indicated o the product itself to obtain the
desired results).
* Before replacing the lamps, disconnect the
appliance from the electric mains. Remove
the screw from the lamp cover glass (dis.15A)
with a screw-driver. Once the burnt out bulb
is localized, turn it anticlockwisely and repla-
ce it with a bulb of the same type.
Re-install the lamp cover glass.
All manuals and user guides at all-guides.com
* To replace the halogen lamps, remove first
the glass-blocking ring (Fig.8A), by levering
with a screw-driver and thus removing the
opaque glass (Fig.8B) - when performing this
operation hold the opaque glass carefully.
Remove the lamp (Fig.8C) without touching it
with uncovered hands. Replace it with another
lamp of the same kind. After the replacement,
re-insert the glass-blocking ring and fasten
it.
* Warning! To take down the appliance from
the cabinet, remove the definitive fixing
screws (fig. 6) using a screw-driver, get off
the grease filters (fig.3B) and the active car-
bon filters, if they are inserted (fig. 7A). Act
on the small handle of the springs, which are
inside the built-in unit, with the necessary
strength to unhook the appliance from the
.
cabinet (fig. 9).
* If the supply cord is damaged, it must be
replaced by the manufacturer or its sevice
agent or a similarly qualified person in order
to avoid a hazard.
16