Dimmer Function - KEKAI OREGON Manual De Instrucciones

Temperature setting increase buttons:
Temperature setting range is15℃ (60℉)- 36℃ (97℉), ( the
default setting temperature is 22℃/72℉), press the UP button on
the keypad or remote control by each time, the temperature will
add 1℃/1℉.If long time press on keypad (don't lose the button,
the the Numbers is change) set temperature will continue to
increase until maximum.(Note that this long press function is not
available on the remote control.) When on temperature setting,
the temperature display window is in a flickering state. After 10S
no operate the set temperature button, then the display window
will be turned back to the room temperature display and in a
constantly bright state .
Temperature setting decrease buttons:
Temperature setting range is15℃ (60℉)- 36℃(97℉), ( the
default setting temperature is 22℃/72℉), press the DOWN
button on the keypad or remote control by each time, the
temperature will reduce 1℃/1℉.If long time press on keypad
(don't lose the button, the the Numbers is change) set
temperature will continue to decrease until the minimum.(Note
that this long press function is not available on the remote
control.) When on temperature setting, the temperature display
window is in a flickering state. After 10S no operate the set
temperature button, then the display window will be turned back
to the room temperature display and in a constantly bright state.

DIMMER FUNCTION :

The flame brightness is on the brightest mode by first time. The
flame brightness is have five levels. If you need to adjust the
flame brightness, every time you press the DIMMER button, the
brightness of the LDE lamp front and back will become dark,
every time you press the DIMMER button, the number will minus
1, when the flame is the darkest, at this time, you press the
DIMMER button, it will returned to the brightest flame again.
CHANGE FLAME COLOR FUNCTION:
The default boot flame is orange COLOR and presses the
COLOR MODE button on the remote control, the display window
by the temperature display to the COLOR display,
(C1,C2, C3,C4,C5 , C6 , C7 , C8 , C9), Every time you press the
button , the LED lights will light by (C1) Orange - (C2) green, (C
3) blue - (C4) white - (C5) green + orange - (C6) orange + blue -
(C7) orange + white -(C8) green + blue
- (C9) green + white .