Paper (Label/Tag) Specifications; Ribbon Specifications - TOSHIBA TEC Corporation B-450-QP Serie Manual De Instrucciones

2. SPECIFICATIONS

2.3 PAPER (LABEL/TAG) SPECIFICATIONS

Label dispensing mode
Item
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
2.4 RIBBON SPECIFICATINS
Type
Width
Length
Outer diameter
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.
2.5 OPTION
Option Name
Cutter module
Strip module
Keyboard module
Expansion I/O inter-
face board
LAN interface board
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC repre-
sentative or TOSHIBA TEC Head Quarter.
All manuals and user guides at all-guides.com
Batch mode
15.0 ~ 999.0
13.0 ~ 997.0
2.0 ~ 20.0
Label
Tag
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.1 ~ 0.17
Spool type
60 mm ~ 110 mm
(300 m)
Ø65 mm (max.)
Type
A stop-and-cut rotary cutter
B-7204-QM
This module strips the label from the backing paper with the
B-7904-H-QM
take-up block and strip block.
This module is an external intelligent keyboard unit.
KB-80-QM
Installing this board in the printer allows a connection with
B-7704-IO-QM
an external device with the exclusive interface, such as the
keyboard module.
This board enables the printer to be used in a LAN network
B-7704-LAN-
by using the command language.
QM
E2-2
ENGLISH VERSION EO1-33005
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
[Unit: mm]
Strip mode Cut mode
25.4 ~ 999.0
Label: 37.0 ~ 999.0
Tag: 25.4 ~999.0
23.4 ~ 997.0 31.0 ~ 993.0
25.4 ~ 114.0
22.4 ~ 111.0
6.0 ~ 20.0
2.0 ~ 20.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
1.0
MIN. 2.0
0.13 ~ 0.17
0.1 ~ 0.17
Description