Product Description - Invacare H291 Manual Del Usuario

Invacare® Cadiz
• C Height adjustable legs (4x)
• D Backrest (H296 only)
• E User manual

8 Product Description

Invacare® Cadiz is a shower stool / shower chair composed
of four anti-slip height adjustable feet and a plastic seat and
backrest (if applicable).
9 Intended Use
This product is intended to be used as a shower aid.
Users are any adults and adolescents with restricted or
limited mobility (e.g.: legs and/or hips). If used without an
assistant, the users must be able to keep their own balance.
Indication
Restricted or limited mobility (e.g.: legs and/or hips) or
having balance issues to stand up or walk due to transitional
or permanent disabilities.
There are no contraindications known when using the
product as intended.
The maximum user weight is 143 kg.
10 Setup
10.1 Safety Information
CAUTION!
Risk of Pinching
– Take care during assembly.
10.2 Assembling the Shower Stool / Shower Chair
(Fig. 3)
Installing the Legs
1. Place the seat upside down on a clean, flat and stable
surface (floor or table). Make sure that the seat plate
is not damaged.
2. Completely insert the four legs into the tube ends A
(for H291) respectively B (for H296) on the underside
of the seat.
WARNING!
Risk of Falling
– Make sure that all four snap buttons G engage
in the leg tube holes with an audible click.
Installing the Backrest (H296)
1. Place the shower chair on its legs.
2. Completely insert both tubes E of the backrest into the
tubes F of the seat.
WARNING!
Risk of Falling
– Make sure that both snap buttons H of the
backrest tubes fully engage in the holes of the
seat tubes with an audible click.
Adjusting the Seat Height (Fig. 4)
The height of the seat can be adjusted between 405
and 505 mm in five steps of 25 mm.
1. Place the seat upside down on a clean, flat and stable
surface (floor or table). Make sure that the seat plate
is not damaged.
2. Press the snap button A of the legs and slide the leg
extension up or down to the desired adjustment hole B.
4
WARNING!
Risk of Falling
– Make sure that all four legs are adjusted to the
same height, see Fig 5.
– Make sure that all four snap buttons engage in
the leg holes with an audible click, see Fig 5.
11 Maintenance
11.1 General Maintenance Information
This product is maintenance-free, provided that the cleaning
and disinfection instructions are adhered to.
11.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
IMPORTANT!
– Clean by hand
– Maximum cleaning temperature 60 °C
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
1637297-B