TOPDON BT300P Manual Del Usuario página 6

7) The test result is as follows:
BATTERY TEST
GOOD RECHARGE
HEALTHY 96% 510A
CHARGE 35% 12.21V
INTERNAL R 5.88mΩ
RATED 520A CCA
2. Cranking Test (12V&24V)
2.1 Before Test
The engine and all other accessory loads must be OFF
before test in order to have accurate results.
2.2 Steps
1) The RED (+) Positive Battery Clamp is connected to the (+)
positive battery terminal, and the BLACK (-) Negative Battery
Clamp is connected to the (-) negative battery terminal.
Ensure that the clamps have a firm, secure grip on the
battery terminals for accurate results.
2) The device will jump to main menu automatically after 3
seconds, then select "CRANKING TEST":
MAIN MENU
BATTERY TEST
CRANKING TEST
CHARGING TEST
REVIEW DATA
LANGUAGE
7
BATTERY TEST
REPLACE
HEALTHY 1% 90A
or
CHARGE 52% 9.00V
INTERNAL R 33.05mΩ
RATED 720A CCA
3) Press "ENTER/PRINT" to enter the "CRANKING TEST"
interface, start the engine according to the prompts.
CRANKING TEST
PLEASE START ENGINE
4) The result will show as below:
For 12V Battery
CRANKING TEST
CRANKING V NORMAL
CRANKING TIME
10.33V
For 24V Battery
CRANKING TEST
CRANKING V NORMAL
CRANKING TIME
22.54V
1599ms
2400ms
8