Mastech YAMAHA MT09 17-UP Guia De Inicio Rapido página 2

Assembly instruction for slider
Note :
Do not �ghten the screws un�l they are completely aligned with the holes.
Before the installa�on, please verify through the manual that all pieces and parts are
complete.
Tools Required:
Hex Allen Wrench Set
Assembled kit
Parts Included:
Aluminium bush Aluminium bush
right le�
Quan�ty Quan�ty
1 1
Socket screw
Washer M10
M10 x 150
TORN1
Quan�ty Quan�ty
2 1
After the installation of the parts, please check that they are aligned and that all the hardware is properly tightened
Calle 76 # 52D - 74 / Telefax: (57+4) 448 8428 / Medellín - Colombia
Plas�c �ps Plate
Quan�ty Quan�ty
2 2
Socket screw bu�om screw
M10 x 130 M4 x 16
TORN2 TORN3
Quan�ty Quan�ty
1 4
www.mastechno.com
Installa�on
1- Remove the screw indicated on de image.
2- Install the slider with the supplies included on the kit
3- Repeat the two steps on each side
LEFT
TORN3
RIGHT
TORN3
YAMAHA MT09 17-UP
TORN1
TORN2