THERMEx VERTICAL PE 1050 Instrucciones De Montaje página 37

M 540211102211072018
INSTALLATION
The hood is wall-mounted and can be used with the exhaust to extract the air outside or to recirculate the air.
The kitchen hood is installed with the following steps:
1
x4
Measure out the position for the bracket of
the hood.
4
Mount the hood on the bracket.
7
Mark the wall with the position of the two
locking holes.
2
Drill the holes and install rawlplugs suitable for
the material into which they are installed.
5
The lid of the hood is opened by activating and
holding down the on/off icon until it opens.
8
x2
Measure out the position for the brackets of
the duct.
3
x3
Mount the bracket with three screws.
6
Remove the filters from the hood.
9
x2
Remove the hood from the wall.
THERMEX VERTIcAL PE 1050
x4
37