Troubleshooting - Duramaxx 10022714 Manual Del Usuario

1. Plug the charging adapter
into a mains outlet and the
charging port.
2. Press the
ton while the device is
switched off. The battery
may be charged while the
device is turned on and in
use. However, a complete-
ly discharged battery can
only be charged when the
device is switched off.
3. The charging LED turns
red during charging and
turns green
battery is charged. The
charge usually lasts 5-6
hours.
IMPORTANT NOTE: Do not overcharge the battery. Overcharging can damage the battery
and result in leakage of battery fluid.
Problem
Blank screen
No signal
The camera has no
light or a weak light
28
Recharge Battery
battery but-
when the

Troubleshooting

Possible Cause and Solution
Change the fuse.
Charge the battery.
Check the power connection. Connect if necessary.
Reconnect the device according to the guide.
Check the camera and screw it into place.
Clean the connections on camera and the main unit.
Press the menu button and adjust the LED brightness