Sleep Operation - Haier HSU-09H03/R2 Manual De Funcionamiento

All manuals and user guides at all-guides.com
Operation

Sleep Operation

Before going to bed, you can simply press the
SLEEP button and unit will operate in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1 C higher than temp. setting. After
O
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops.
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
Remote Controller
SLEEP operation starts
C further.
O
In HEAT mode
2.
1 hours after SLEEP mode starts, temp
will become 2
setting. After another 1 hours, temp
decrease by 2
another 3 hours, temp. rises by 1
further. The unit will run for further 3
hours then stops. Temp. is lower than
temp. setting so that room temperature
won't be too high for your sleep.
In AUTO mode
3.
The unit operates in corresponding sleep
mode adapted to the automatically selected
operation mode.
4. In FAN mode
It has no SLEEP function.
Note
The sleeping hours lasts 8 hours and couldn't be adjusted.
When timing on function is set, the sleeping function can't be set up
After the sleeping function is set up, if user resets timing on
function, the sleeping function will be cancelled; the
machine will be in the state of timing-on. If the sleeping
function and timing-on function are set up at the same time,
no matter which one is operated earlier, the machine will be
off automatically, and the other function will also be cancelled.
15
SLEEP operation stops
Approx.6hrs
Rises 1 C
O
1 hr
Rises 1 C
O
1 hr
Unit stop
Temp.setting
In COOL, DRY mode
C lower than temp.
O
C further. After more
O
Temp.setting
1 hr
Decreases 2 O C
1 hr
Decreases 2 O C
3 hrs
O
3 hrs Rises 1
SLEEP
SLEEP
operation stops
operation starts
In HEAT mode
C
O
Unit stop
C