Descargar Imprimir esta página

Leap PQ9907S Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

setting screen ( "bonus" character shows above on the screen). The bonus
time can be set to 59 seconds maximum. If the time is set to 0, it means no
bonus function.
2.4, Set delay time:
When the right bonus time finish setting, switch to the "delay time" setting
screen, (the screen shows "delay" character above). The maximum delay time
is 59 seconds. If the time is set to 0, it means no delay function.
Note: "bonus" and "delay" special note:
The initial value of bonus and delay both are 0, it can only run one mode of
"bonus" or "delay" when using the machine, start bonus mode means no delay
function, open delay model means no bonus function. Therefore, when the
bonus value is larger than 0, the delay value becomes 0 automatically, In the
same way, the delay value is larger
than 0, the bonus value becomes 0
automatically.
2.5, Set alarm:
When the right delay time finish setting, continue switching to the "alarm"
setting screen. (
symbol is displayed in the above of the screen)
"0" means: Turn off the alarm function, exit the setting mode, alarm symbol will
not displayed.
"1" means: alarm function opened, exit the setting mode, alarm symbol will be
displayed.
When the alarm function is turned on, the " Beep" sound alarms last for 3
seconds after one party is losing and reports time out.
(Note: the on / off setting of alarm only can be set in the settings mode.)
2.6, Exit setting mode:
In the setting mode, long press
key for 2 seconds to exit setting mode.

Publicidad

loading