Switching Off The System; Sleep Function - Lenco PR2700 Manual Del Usuario

Radio fm portátil con rds y usb

Idiomas disponibles

Introduction

Functions

LCD Layout

POWER ON

2.1. Switching on the system

In standby mode, press the FUNCTION button to turn on the unit with the last selected source (Default is tuner)

2.2. Switching off the system

Press and hold the FUNCTION button for 2 seconds to switch to standby mode. The display will show the time

Note: the dim and alarm setting are still functional in the standby mode.

SOURCE SELECT

When the unit is on, Press the FUNCTION button to select the desired music source (Tuner  USB  AUX...)

Tuner: When TUNER mode is selected, `TUNER´ will be displayed for a few seconds. Then the display will show the

FM frequency.

USB: When USB mode is selected, `USB´ will be displayed for a few seconds. Then the display will show the track

number and play time.

Aux: When AUX mode is selected, `AUX´ will be displayed. The device connected to the AUX connection will be heard.

CLOCK

If powered on for the first time, the clock display will show "0:00"

Setting the clock:

1. The Clock can be set in Standby only. Press and hold MEMORY button for 2 seconds. 24H or 12H clock mode

show.

2. Press SKIP+/SKIP‐ button to select 12H or 24H clock mode.

3. Press "CLOCK" button.

4. Press "CLOCK" button again to adjust the minutes with the SKIP+/SKIP ‐ buttons

5. Press "CLOCK" button again to adjust the YEAR with the SKIP+/SKIP ‐ buttons

6. Press "CLOCK" button again to adjust the MONTH with the SKIP+/SKIP ‐ buttons

7. Press "CLOCK" button again to adjust the DAY with the SKIP+/SKIP ‐ buttons

8. Press "CLOCK" button again to adjust the CT (Central Time) on/off function with the SKIP+/SKIP ‐ buttons

9. Press "CLOCK" again to store the clock settings.

10. NOTE: When during clock setting no buttons are pressed within 10 seconds, the system will exit clock setting

mode without storing any adjustments.

Configuring the sleep mode.

a) You can press the SLEEP button in standby or when powered on.

b) Press FUNCTION button to select the desired source.

Tabla de Contenido