Audizio Trento Manual De Instrucciones página 5

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts
are present, and have been received in good condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and
all packing materials. In the event that the product must be returned to the factory, it is important that the product be
returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the
mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product
must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Stand-by button
Press to put the device in/out of standby mode.
2. Headphone jack
6.35mm headphones output jack.
3. Power LED
4. Infrared remote control sensor
5. 2.4" color TFT display
6. Menu
Press to enter the main menu to gain access to different modes/settings.
7. Back
Press to access the previous menu / delete entry of character's input / cursor left.
8. Forward
Press to cycle through the display option in radio playing mode / enter the edit menu in Favourite list / cursor right.
9. Tune / Select
Rotate to navigate menu / to adjust volume. Press to select an item.
10. WiFi antenna connector
11. LAN entry connector (10Mbps RJ45)
12. Optical output (Toslink)
13. Co-axial output
14. RCA line output
15. DAB/FM antenna connector
16. DC adapter connector
17. Power switch
Switch to turn the device on/off.
5