How To Change The Password - Stardom SOHORAID SR2 Serie Manual Del Usuario

Step 6 This display indicates that the switch has been done successfully. Please reboot the
SOHORAID SR2.

6. How to Change the Password

The default password setting of SOHORAID SR2 is "0000". If you want to change the
password, please follow the steps below:
Step 1 After turning on the power, press "ENT" when the screen below is displayed on the LCD.
Step 2 When the "Enter Password" screen appears, please enter "0000" (press ▼ or ▲ to
choose numbers, and then press "ENT").
Step 3 Press ▼ or ▲ to switch the screen from "CHANGE RAIDMODE" to "SETUP
PASSWORD".
Step 4 Press ▼ or ▲ to change the password, and then press "ENT" to confirm.
Step 5 When the following screen appears, press "ENT" if the password is correct. If not, press
"ESC".
Step 6 This display indicates that the switch has been done successfully.
SOHORAID SR2 Series User Manual
RaidMode Changed
Pls Reboot Sys
STARDOM SR2
Booting...
PASSWORD
0000
SETUP PASSWORD
YES NO
PASSWORD
XXXX
PASSWORD : XXXX
YES NO
SETUP PASSWORD
OK
English
Deutsch
Français
Español
中文
日本語
한국어
9