Installation Instructions; Unpack The Air Conditioner - Hisense AP1019CR1G Instrucciones De Uso E Instalación

WARNING
The length of the exhaust hose is specially designed according to the specification of the product.
Do not replace, or extend it with your own private hose as this could cause malfunction.
Vertical Sliding Window
20"
(50 cm)
NOTE:
■ For best performance, allow at least 20 in of air space on all sides of the unit for good air circulation.
■ Do not block the air outlet.
■ Provide easy access to the grounded 3 prong outlet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
Remove and recycle packaging materials.
■
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Caution: Installation accessories are stored in the top of the carton, and are required for proper cooling
performance. Please remove all accessories from packing materials before use.
20"
(50 cm)

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner

Horizontal Sliding Window
20"
(50 cm)
Do not use sharp instruments, rubbing alcohol, flammable
■
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
Handle the air conditioner gently.
■
Keep unit upright at least 2 hours prior to use.
■
5
20"
(50 cm)