When Listening To Music; Distorted Sound - Sony TMR-BT10A Manual De Instrucciones

When listening to
music
No sound
, Check the connection between this
unit and the stereo audio source
device connected to this unit.
, Check that both this unit and the
Bluetooth stereo audio receiving
device are turned on.
, Ensure that this unit is not too far
from the Bluetooth stereo audio
receiving device, or this unit is not
receiving interference from a wireless
LAN, other 2.4 GHz wireless device,
or microwave oven.
, Check that Bluetooth connection is
made properly between this unit and
the Bluetooth stereo audio receiving
device.
, Turn up the volume of the Bluetooth
stereo audio receiving device. For
details on volume adjustment, refer to
the operating instructions supplied
with the Bluetooth stereo audio
receiving device.
, Turn up the volume of the stereo
audio source device as high as
possible to the extent that sound is
not distorted.
, Pair this unit and the Bluetooth stereo
audio receiving device again (page
10).
Low sound level
, Turn up the volume of the stereo
audio source device as high as
possible to the extent that sound is
not distorted.
, Turn up the volume of the Bluetooth
stereo audio receiving device. For
details on volume adjustment, refer to
the operating instructions supplied
with the Bluetooth stereo audio
receiving device.
, Connect the audio in plug to the
headphone jack instead of the LINE
OUT jack.

Distorted sound

, Turn down the volume of the stereo
audio source device to the point
where the sound is no longer
distorted. For details on volume
adjustment, refer to the operating
instructions supplied with the stereo
audio source device.
, Connect the audio in plug to the
headphone jack instead of the LINE
OUT jack.
Cannot be connected to a
device that has been
paired and connected
before.
, This unit tries to connect with either
of the last two devices recognized
before. If this unit cannot make the
Bluetooth connection with a paired
device, pair the device again, or try
making the Bluetooth connection
from the Bluetooth stereo audio
receiving device if possible.
, Pairing information may be deleted.
Pair the device again (page 10).
19
US