Charging The Unit - Sony TMR-BT10A Manual De Instrucciones

Charging the unit

The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
1
Connect the supplied
AC power adaptor with
the battery charging
stand.
Battery charging
stand (supplied)
2
Connect the supplied
AC power adaptor to an
AC outlet.
Battery charging
stand (supplied)
8
US
(Rear)
AC power
adaptor
(supplied)
To an AC
outlet
3
Put the unit on the
battery charging stand.
Portable Stereo
Transmitter
Contact pin
Note
If the holding clip is turned, the unit
cannot be set on the battery charging
stand and charging does not start.
Turn the holding clip back to the
original position before charging.
Rest the unit on the battery
charging stand so that the unit's
terminal for the battery charging
stand meets the contact pin on
the battery charging stand, and
make sure that the indicator
(red) lights up.
Charging is completed in
about 3 hours* and the
indicator (red) goes off
automatically.
* Time required for empty battery
to recharge.
Tip
When charging the battery, the unit is
turned off automatically.