General Notes On Safety; Use Of The Machine For Purposes For Which It Is Intended; Incorrect Use; Ec Declaration Of Conformity - BEHAbelt RS02 Manual De Instrucciones Y Datos Técnicos

1.1 GENERAL NOTES ON SAFETY

This operation manual is applicable for the machine RS02 230V / 115V.
The machine may only be handled by personnel who are qualified.
Hold power tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a «live» wire will
make exposed metal parts of the tool «live» and shock the operator.
WARNING! Read all safety warnings and all instructions. Failure to follow the warn-
ings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1.2 USE OF THE MACHINE FOR PURPOSES FOR WHICH
IT IS INTENDED
The machine is designed for welding of belts made from TPU (Polyurethane).

1.3 INCORRECT USE

All uses other than those described under section 1.2 are regarded as incorrect use and
are therefore not admissible.

1.4 EC DECLARATION OF CONFORMITY

Continuous double or reinforced installation in accordance with Class II IEC 536.
Conformity mark, confirms that the applicable guidelines have been observed. The
EMC guideline (89/336/EEC) with the Standards EN 50081-1 and EN 50082-1 have
been met. The low voltage guideline (73/23/EEC) with the Standard EN 61010-1 has
also been met.
Glottertal, 10/2016
Markus Beha, Managing Director
13