Features; Product Specifications; Assembly; Packing List - Craftsman 315.DD2100 Manual Del Operador

PRODucT SPEcIFIcATIOnS

Chuck ...........................................................1/2 in. Keyless
Motor ............................................................... 19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
knOW YOuR DRILL-DRIVER
See Figure 1, page i.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAgE
Bits provided with the drill-driver can be placed in the
storage area, located on the base of the tool.
DIREcTIOn OF ROTATIOn SELEcTOR
(FORWARD/REVERSE/cEnTER LOck)
Your drill-driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the direction of rotation selector in the OFF (center lock)
position will lock the switch trigger to help reduce the
possibility of accidental starting when not in use.
LED WORkLIgHT
The LED worklight illuminates when the switch trigger is
depressed. This provides extra light for increased visibility.
unPAckIng
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARnIng:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.

PAckIng LIST

Drill-Driver
Double-ended Bit (2)
Operator's Manual

FEATuRES

No Load Speed ....................... 0-375/0-1,600 r/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ................................................................... 465 in.lb.
kEYLESS cHuck
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LEVEL
A level is located on the rear of the motor housing to help
keep the drill bit level during use.
TORQuE ADJuSTmEnT RIng
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED gEAR TRAIn (HI-LO)
The two-speed gear train is designed for drilling or driving
at LO (1) or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.

ASSEmBLY

WARnIng:
not operate this tool until the parts are replaced. Use
of this product with damaged or missing parts could
result in serious personal injury.
WARnIng:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARnIng:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
6 - English
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that