Krampouz Design Instrucciones De Uso página 12

 To guard against electric shocks, do not immerse the lead, connector or body of the
appliance in water or any other liquid. Do not handle with wet hands.
 Do not leave the lead hanging from a table or counter.
 Do not place the appliance and its lead on or near a surface which is likely to become
hot (cooking plate, gas burner, oven, etc.).
 Place the appliance on a stable and dry surface, slightly away from the edge and further
than 20 cm away from any wall and heat-sensitive element.
 Caution: Do not insert aluminium foil or any other material or object between the plate
and the frame (ventilation zone).
 Do not obstruct the ventilation holes in the bottom plate under the frame.
 Do not obstruct the frame's ventilation inlets.
 Warning: do not use this appliance with charcoal or an energy source other than the
one it was designed for (electric power).
 Disconnect the plug when the appliance is not in use or before cleaning it.
 Leave the appliance to cool down before handling or cleaning it.
 Do not handle the appliance when hot.
 Do not clean the appliance with a high or low pressure water spray.
 Do not use chlorinated products to clean stainless steel.
 When the appliance is not in use, store it in a dry location.
 We advise you to keep the original packaging to store the appliance.
 Do not connect or use an appliance with a damaged lead or plug. If the power supply
cable is damaged it must be replaced by the distributor, its after-sales service or
qualified persons to avoid any danger.
 In the event of a failure, inspection and repairs must be performed by an approved
technician.
 Any maintenance operations must be performed by an approved technician.
 The appliance is not intended to be operated using an external timer or a separate
remote control system.
KEEP THESE INSTRUCTIONS
- 12 -