Spark Arresting Screen In Muffler - Stihl BR 700 Manual De Instrucciones

English
3
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press the spark plug
boot (1) snugly onto the spark plug
terminal (2).
Do not use a spark plug with a
detachable SAE adapter terminal (3).
Arcing may occur that could ignite
combustible fumes and cause a fire.
This can result in serious injuries or
damage to property.
Only use resistor type spark plugs
N
with solid, non-threaded terminals
22
Installing the spark plug
1
2
Screw the spark plug (3) into the
N
cylinder and fit the boot (2) (press it
down firmly).
Spark Arresting Screen in
Muffler
If the engine is down on power,
N
check the spark arresting screen in
the muffler.
Wait for the muffler to cool down.
N
2
2
3
Loosen the screws (1).
N
Remove the scoop (2).
N
Remove the spark arresting
N
screen (3).
Clean the spark arresting screen. If
N
the screen is damaged or heavily
carbonized, fit a new one.
Refit the spark arresting screen.
N
Fit the scoop.
N
1
1
3
BR 700, BR 700 X