Program Change - Yamaha Clavinova CLP-130 Manual De Instrucciones

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
CLP-130
GRANDPIANO 1
VARIATION
GRANDPIANO 2
VARIATION
E.PIANO 1
VARIATION
E.PIANO 2
VARIATION
HARPSICHORD
VARIATION
E. CLAVICHORD
VARIATION
VIBRAPHONE
VARIATION
CHURCH ORGAN
VARIATION
JAZZ ORGAN
VARIATION
STRINGS
VARIATION
CHOIR
VARIATION
GUITAR
VARIATION
WOOD BASS
VARIATION
E.BASS
VARIATION
• When program change reception is turned OFF in the Func-
tion mode, no program change data is transmitted or
received. Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data Transmission
Transmitted every
F8H
96 clocks
FAH Recorder start
FCH Recorder stop
Transmitted every
FEH
200 milliseconds
• Caution: If an error occurs during MIDI reception, the Damper,
Sostenuto, and Soft effects for all channels are turned off and
an All Note Off occurs.
72 Appendix
CLP-130/120
P.C.#=Program Change number
CLP-120 MSB LSB
GRANDPIANO 1 0 122
— 0 123
GRANDPIANO 2 0 112
— 0 112
E.PIANO 1 0 122
— 0 122
E.PIANO 2 0 122
— 0 123
HARPSICHORD 1 0 122
HARPSICHORD 2 0 123
— 0 122
— 0 123
VIBRAPHONE 0 122
— 0 122
CHURCH ORGAN 1 0 123
CHURCH ORGAN 2 0 122
JAZZ ORGAN 0 122
— 0 123
STRINGS 1 0 122
STRINGS 2 0 122
CHOIR 0 122
— 0 123
GUITAR 0 122
— 0 122
— 0 122
— 0 124
— 0 122
— 0 122
Reception
Received as 96-clock tempo timing
when MIDI clock is set to External
Recorder start
Not received when the MIDI clock is
set to Internal.
Recorder stop
Not received when the MIDI clock is
set to Internal.
If a signal is not received via MIDI for
more than 400 milliseconds, the
same processing will take place for
All Sound Off, All Notes Off and Reset
All Controllers as when those signals
are received.
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> [F7H]
F0H, 43H, 0nH, 7CH (n: channel number)
00H, 2DH (data length)
P.C.#
43H, 4CH, 20H, 20H (CL)
0
43H, 4CH, 50H, 27H, 30H, 32H (CLP02)
0
30H, 30H (version x, y)
0
[PANEL DATA]
1
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)
5
F7H
88
• Panel Data Contents
4
(1) 1'st Voice
4
(2) Dual On/Off
6
(3) Dual Voice
6
(4) Dual Balance
(5) Dual Detune
7
(6) Dual Voice1 Octave
7
(7) Dual Voice2 Octave
11
(8) Dual Voice1 Effect Depth
(9) Dual Voice2 Effect Depth
12
(10) Split On/Off
19
(11) Split Voice
19
(12) Split Point
(13) Split Balance
16
(14) Split Voice1 Octave
16
(15) Split Voice2 Octave
48
(16) Split Voice1 Effect Depth
(17) Split Voice2 Effect Depth
49
52
• Panel data send requests cannot be received.
52
7. SYSTEM EXCLUSIVE MESSAGES
24
(Universal System Exclusive)
25
32
(1) Universal Realtime Message
32
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
33
[llH] -> [mmH] -> [F7H]
35
MIDI Master Volume
• Simultaneously changes the volume of all channels.
• When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master vol-ume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don't care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
(18) Split Dumper Mode
(19) Reverb Type 1
(20) Reverb Type 2
(21) Reverb Depth 1
(22) Reverb Depth 2
(23) Effect Type 1
(24) Effect Type 2
(25) Effect Depth
(26) Variation On/Off
(27) Touch Sensitivity
(28) Fixed Data
(29) Left Pedal
(30) Soft Pedal Depth
(31) Absolute tempo low byte
(32) Absolute tempo high byte
(33) Key-Off Sampling Depth