To Switch The Tv Off; Input Selection; Basic Operations; Operation With The Buttons On The Tv - Nevir NVR-7201-32HD-N Manual De Instrucciones

Note: If you switch on your TV via
the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on.

To Switch the TV Off

• Press the " " button on the remote control or press
the " " switch on the TV, so the TV will switch to
standby mode.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
P+ or P- buttons on

Basic Operations

You can operate your TV using both the remote
control and onset buttons.

Operation with the Buttons on the TV

Volume Setting
• Press
" button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press "
"P/CH -" button to select the previous programme.
Viewing Main Menu
• Press the "
to view main menu. In the Main menu select sub-menu
using "AV" button and set the sub-menu using "
" or "
refer to the menu system sections.
AV Mode
• Press the "
to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
• Press
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press
• Press
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the fi rst digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
English - 55 -
button to decrease volume or "
P/CH +" button to select the next programme or
" / " " button at the same time
" buttons. To learn the usage of the menus,
AV" button in the control panel on the TV
"V+" button to increase the volume. Press
P- button to select the previous programme.
P+ button to select the next programme.
"V-"