Cleaning, Care & Maintenance; Auto Defrost - Polar Slim Bottle Cooler CS586 Manual De Instrucciones

UK
Operation
Control Panel
The control panel is located at the front of the
cabinet.
Turn On
1. Turn the thermostat to the desired temperature
setting:
I (cool) to IV (Cold)
Note: Setting the switch to '0'
turns off the appliance.
2. Close the door of the appliance.
3. Connect the appliance to a mains power supply.
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with warm soapy water.
• Always wipe dry after cleaning.
• A POLAR agent or qualified technician must carry out repairs if required.
• If left unused for any length of time, store the appliance with the door ajar.

Auto Defrost

Periodically the appliance will run an automatic defrost cycle to prevent any ice build-up.
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the life of the appliance. POLAR recommend that a POLAR
agent or qualified technician clean the condenser.
6
CS586_ML_A5_v2_20200402.indb 6 2020/4/2 09:59