IMPORTANT SAFETY INSTRUCTIONS
EN
WARNING – To guard against injury, basic safety precautions should be observed,
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
and all the important notices on the appliance before using. Failure to do so may result in loss of
fish life and/or damage to this appliance.
2. DANGER – To avoid possible electric shock, special care should be taken since water is employed
in the use of aquarium equipment. For each of the following situations, do not attempt repairs
yourself; return the appliance to an authorized service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the
power source.
B. Carefully examine the appliance after installation. It should not be plugged in if there is water
on parts not intended to be wet. If the appliance or any part of it falls into the water DO NOT
reach for it. First unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is
dropped or damaged in any manner. The power cord of this appliance cannot be replaced; if
the cord is damaged, the appliance should be discarded. Never cut the cord.
D. To avoid the possibility of the appliance
plug or receptacle getting wet, position
the appliance to one side of a wall mounted
receptacle to prevent water from dripping
onto the receptacle or plug. A "drip loop"
(see illustration) should be arranged by the
user for the cord connecting appliance to
a receptacle. "The drip loop" is that part of
the cord below the level of the receptacle or
the connector if an extension cord is used, to
prevent water from travelling along the cord
and coming in contact with the receptacle. If
the plug or receptacle does get wet, DO NOT unplug the cord. Disconnect the fuse or circuit
breaker that supplies power to the appliance. Then unplug and examine for presence of
water in receptacle.
3. This appliance is not intended for use by persons (including children) with significantly
impaired physical or mental capabilities, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety. Children should
always be supervised to ensure that they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts .
5. CAUTION - Always unplug or disconnect all appliances in the aquarium from electricity supply
before placing hands in water, before putting on or taking off parts and while the equipment is
being installed, maintained or handled. Never yank cord to pull plug from outlet. Grasp the plug
and pull to disconnect. Always unplug an appliance from an outlet when not in use.
6. Do not install or store the appliance where it will be exposed to weather or temperatures below
freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO NOT IMMERSE.
7. Make sure the appliance is mounted correctly and securely positioned on the aquarium before
operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for
less amperes or watts than the appliance rating may overheat. Care should be taken to arrange
the cord so that it will not be tripped over or pulled. The connection should be carried out by a
qualified electrical installer.
9. Use only with AC adapter supplied with this product.
10. The socket-outlet shall be installed near the equipment and shall be easily accessible.
11. LED power supply shall not be positioned on or into the cover frame.
12. "Z" attachments: The external flexible cable or cord of this luminaire cannot be replaced; if cord
is damaged the luminaire shall be destroyed.
13. This luminaire can be mounted on any aquarium with glass thickness of between 3mm and 15mm.
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended that this manual is
thoroughly read and understood. Failure to do so may result in damage to this product.
The Fluval Aquasky Bluetooth
to allow the user to adjust, via Bluetooth
various environments; and create such effects as cloud cover, fading lunar, storm and lightning.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
LED combines super bright 3000-25000 K LEDs with tri-color RGB LEDs
®
enabled smart device, the light spectrum in order to replicate
®