Layout And Items Supplied; Intended Use; Technical Data; Before Starting The Appliance - EINHELL BT-VC 500 Manual De Instrucciones Original

Anleitung_BT_VC_500_SPK7:_
Important! After operation, empty the ash filter
and the extractor completely, otherwise there is a
fire risk.
If the power cable for this appliance is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
Children must always be supervised in order to
ensure that they do not play with the appliance.

2. Layout and items supplied

1 Handle
2 On/Off switch
3 Appliance head
4 Filter basket
5 Filling level indicator
6 Locking hook
7 Tank
8 Suction hose connector
9 Suction tube
10 Flexible hose
11 Filter cartridge for fine ash dust.
12 Foam filter

3. Intended use

The ash vacuum is designed for the extraction of cold
ashes, material from ovens chimneys or grills.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator - not the manufacturer -
will be liable for any damage or injuries caused as a
result thereof.
Please note that our appliance has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
appliance is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage:
Power input:
Tank volume:
Weight:
20.05.2009 16:39 Uhr Seite 9

5. Before starting the appliance

Important!
Before you connect the appliance to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
The appliance may only be connected to a shock-
proof socket.

5.1 Assembling the appliance

Fitting the appliance head (Fig. 2)
The appliance head (3) is fastened to the
container (7) by the locking hook (6). To remove
the appliance head (3), open the locking hook (6)
and remove the appliance head (3). When fitting
the appliance head (3), make sure that the
locking hook (6) locks into place correctly.
Fit the vacuum tube (9) onto the end of the
suction hose (10); the hose ends are identical.
Fit the suction hose (10) onto the connection (8)
and turn until securely attached.
5.2 Fitting the filter
Important!
Never use the ash vacuum without the filter!
Always ensure that the filters are perfectly secure.
Dismantling/Assembly of the filter (Fig. 6 -8)
Turn the filter cage (4) to the left and remove it from
the appliance head (3). Next, remove the filter
cartridge for fine ash dust (11). Now remove the foam
filter (12).
Important!
If there is no filter cartridge for fine ash dust (11)
mounted on the appliance head (3), the ash filter
cannot be switched on
6. Operation
6.1 ON/OFF switch (Fig. 1/2)
Press the ON/OFF switch (2) to switch the equipment
ON and OFF.
6.2 Filling level indicator (Fig. 1/5)
The ash vacuum is fitted with a filling level indicator
230V ~ 50 Hz
(5) . If the filling level indicator (5) shows a red bar,
500 W
tank contents and filter should be emptied or cleaned.
22 l
Important!
3.9 kg The ash vacuum is not suitable for the vacuuming of
combustible liquids.
GB
9