Warning; Introduction; Technical Details - Sagola MACK150 Manual De Instrucciones

Before starting the unit you must read, take into consideration
and comply with all the indications described in this Manual.
This manual must be kept in a safe place, accessible to all
users of the unit.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed only
for the purpose for which it was designed.
This unit belongs to the family of devices designed to spray
products with compressed air by means of a spray gun. They
provide a high level of product transfer (T > 65%) and
excellent quality finish, as well as low levels of contamination.
The equipment consists of the following standard features:
- Pump model MACK 150, MACK 320
- Instruction manual
- Case
Unit featuring a pneumatic cylinder that activates the hydraulic
device which provides the pressure necessary to spray the
product.
The unit can be supplied in the following versions:
Pneumatic cylinder
Unit supply
Engine stroke
Maximum air consumption (60 cycles/Minute)
Maximum pressure at air inlet
Minimum Ø of supply hose
Lubricator Oil
Packing Gland Oil
Maximum Pressure at the product outlet
Free flow-rate (60 cycles/minute)
Flow-rate per cycle
Air inlet
Product Inlet
Product Outlet
MAXIMUM Spray air cap size
Dimensions: 480x470x875 mm.
Maximum operating temperature of 50
Work pressure engraved on the Airless Gun
CE Approvals

1. WARNING

2. INTRODUCTION

3. TECHNICAL DETAILS

o
C
Ex II 2G X
- 16 -
Likewise, accident prevention standards, work centre
regulations and directives and current legislation and
restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA
products mentioned in this manual are registered trademarks
or brand names of the company SAGOLA S.A.
As optional and complementary elements of the equipment,
in this Manual the following are included:
-Product hoses
-Airless and Mixed Gun
-Spray air caps:
- Fixed Spray Fan
- Rotational (Self-cleaning)
- Mixed
- With a gravity cup, which is filled with the product to be
applied.
- With a suction probe, which is inserted directly in the
container of the product to be applied.
- The team MACK 320 may include versions for single o
double regulation.
MACK 150
Ø 80 mm.
Treated Compressed Air
60 mm.
245 Litres/min.
7 bar
6 mm.
SAE 10
SAGOLA 30090098 Lubricant
91 bar (1320 psi)
2.70 litres/minute
1/4" H SAGOLA Fast Connector 11020420
Tube Ø12xØ21
1/4" GAS BSP M
MACK 320
Ø 125 mm.
610 Litres/min.
226 bar (3278 psi)
45 cc.
0.018"