Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys  until they
click, and pull down the bracket , then
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 22).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket , then
attach the protection collar .
Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
182 mm (7
1
/
53 mm (2
1
/
in)
8
Catch
3
/
32
in)
4
21
GB

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido